Research Catalog

Title

Proceedings of the ASME Manufacturing Engineering Division--2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition : November 11-16, 2001, New York, New York / sponsored by the Manufacturing Engineering Division, ASME ; principal editor, Amit Bagghi ; contributing editors, J. Cao [and others].

Publication

New York, N.Y. : American Society of Mechanical Engineers, ©2001.

Items in the Library & Off-site

Details

Additional Authors

• Bagghi, Amit.
• Cao, Jian.
• American Society of Mechanical Engineers. Manufacturing Engineering Division.
• International Mechanical Engineering Congress and Exposition (2001 : New York, N.Y.)

Description

viii, 480 pages : illustrations; 28 cm.

Series Statement

MED ; vol. 12

Uniform Title

MED (Series) ; v. 12.

Subject

• Production engineering > Congresses
• Manufacturing processes > Congresses
• Industrial engineering > Congresses
• Machining > Congresses
• Industrial engineering
• Machining
• Manufacturing processes
• Production engineering

Genre/Form

Conference papers and proceedings.

Bibliography (note)

• Includes bibliographic references and author index.

Contents

• Modeling, Sensing and Controlling Micro-Machining Processes -- Introduction / John T. Roth, Jon R. Pratt -- Microstructure-Level Force Prediction Model for Micro-Milling of Multi-Phase Materials / Michael P. Vogler, Richard E. DeVor, Shiv G. Kapoor -- The Effect of Run-Out on Design for Manufacturing in Micro-machining Process / Kiha Lee, Sung-Hoon Ahn, David A. Dornfeld, Paul K. Wright -- Mechanistic Model for Dynamic Forces in Micro-Drilling / Yongping Gong, Kornel F. Ehmann -- Current Research in Material Removal Processes -- Introduction / Vis Madhavan, Robin Stevenson -- Generalized Mechanistic Force System Model of Ball-End Milling for Sculpture Surface Machining / Ismail Lazoglu -- An Improved Time Domain Simulation for Dynamic Milling at Small Radial Immersions and Large Depths of Cut / Marc L. Campomanes, Yusuf Altintas -- Using the Eigenvalues of Multivariate Spectral Matrices to Monitor Equipment / John T. Roth -- Analytical Convolution Model of Cutting Forces in 3-D Ball End Milling / Richard Y. Chiou, Bing Zhao -- Geometry Analysis and Simulation in Shoe Centerless Grinding / Hong Zhang, Jungshen Lieh, David Yen, Xiaozhong Song, Xiaojian Rui -- Delamination Models in Drilling of Composite Materials Using Saw Drill and Candle-Stick Drill / H. Ho-Cheng, C. C. Taso -- Fundamental Issues in Machining -- Introduction / Vis Madhavan, Robin Stevenson -- An Experimental and Computational Study of Temperature and Strain Fields in Metal Cutting / Alan T. Zehnder, Yogesh K. Potdar, Xiaomin Deng, Chandrakant Shet.
• Measurement of the Temperature Field at the Tool-Chip Interface in Machining / V. Narayanan, K. Krishnamurthy, S. Chandrasekar, T. N. Farris, V. Madhavan -- Development of a Model for the Prediction of the Energy Partition in a Peripheral Milling Operation / G. Shen, O. Arici, J. W. Sutherland -- A Model for the Tool Temperature During Machining With a Rotary Tool / Hossam A. Kishawy, Andrew G. Gerber -- Effects of Friction and Cutting Speed on Cutting Force / Troy D. Marusich -- Microstructure-Level Modeling of Ductile Iron Machining / L. Chuzhoy, R. E. DeVor, S. G. Kapoor, D. J. Bammann -- Machining Simulation of Ductile Iron and its Constituents. Part I: Estimation of Material Model Parameters and Their Validation / L. Chuzhoy, R. E. DeVor, S. G. Kapoor, A. J. Beaudoin, D. J. Bammann -- Machining Simulation of Ductile Iron and its Constituents. Part II: Numerical Simulation and Experimental Validation of Machining / L. Chuzhoy, R. E. DeVor, S. G. Kapoor -- A High-Magnification Experimental Study of Orthogonal Cutting With Edge-Honed Tools / Raja K. Kountanya, William J. Endres -- An Investigation of the Predicting Capabilities of a Variable Flow Stress Machining Theory / P. Mathew -- Evaluation of Chip Morphology in Hard Turning Using Constitutive Models and Material Property Data / Gerard Poulachon, Alphonse L. Moisan, I. S. Jawahir -- Extension of Oxley's Analysis of Machining to Use the Johnson-Cook Material Model / Amir H. Adibi-Sedeh, Vis Madhavan, Behnam Bahr.
• An Intrinsic Size-Effect in Machining due to the Strain Gradient / D. Dinesh, S. Swaminathan, S. Chandrasekar, T. N. Farris -- A Model-Based Prediction Approach to Understanding Tool Wear / W. Kim, T. Wong, P. Kwon -- Material Development and Utilization in Forming -- Introduction / Jian Cao, Z. Cedric Xia, Jwo Pan -- Investigation into the Tube-Bending Process by Using Elastomer / Yuansong Zeng, Zhiqiang Li -- Deformation During High Pressure and Pressure Sequence Hydroforming of Tubes / H. Orban, S. J. Hu, J. L. Duncan, Gary Morphy -- An Experimental Investigation of Necking in Thin Sheets / Wei Tong, Nian Zhang -- Modeling of Necking/Shear Failure of Aluminum Sheet Metals With Consideration of Void Nucleation and Growth / W. Y. Chien, J. Pan, S. C. Tang -- Formability Enhancement for Tailor-Welded Blanks Using Blank Holding Force Control / Sijun He, Xin Wu, S. Jack Hu -- Plastic Deformation of a Perforated Sheet With Non-Uniform Circular Holes Along the Thickness Direction / Fuh-Kuo Chen, Yi-Che Lee -- Enhancement of Coil Stiffness Using a Cardboard Core / Shunping Li, Jian Cao -- A New Forming Limit Criterion and Ductile Fracture Prediction in the Forging of Sintered Powder Preforms / Cheng-Chao Huang, Jung-Ho Cheng -- Controls, Equipment, and Techniques for On-Machine Inspection -- Introduction / Joseph D. Drescher, M. Alkan Donmez -- Dynamic Modeling for Machine Tool Thermal Error Compensation / Hong Yang, Jingxia Yuan, Jun Ni.
• Modal Inverse Frequency Response Heat Transfer Analysis for Estimation of Machine Tool Transient Thermal Loads / Youji Ma, Jingxia Yuan, Jun Ni -- Stream of Variation Based Analysis and Synthesis of Measurement Schemes in Multi-Station Machining Systems / Dragan Djurdjanovic, Jun Ni -- Industry-University Educational Partnerships for the New Millennium -- Introduction / Gloria J. Wiens, David C. Grider -- The 2000 CASA/SME University Lead Award Winning Joint Engineering/Business Masters in Manufacturing Program at Penn State / Clayton O. Ruud, Michael P. Hottenstein, Cindy K. Winkelblech -- Grading and Motivation of Student Teams Working on Industry-Sponsored Mechanical Design Projects / David G. Beale, P. A. Simionescu, David Dyer -- Institutionalized University and Industry Partnership in Multidisciplinary Design and Build: Product and Process Realization / R. Keith Stanfill, Gloria J. Wiens, William E. Lear, E. Dow Whitney -- Nontraditional Manufacturing: Research and Applications -- Introduction / Y. Lawrence Yao, Xiangli Chen, Richard N. Smith, Jamil A. Khan -- Heat Input Control in 3D Laser Cladding Based on Infrared Sensing / Dongming Hu, Yunxin Wu, Radovan Kovacevic -- Influence of Geometrical Factor on Heat Conduction Rate During GTAW for Welding-Based Deposition / Ivan S. Kmecko, Zoran Jandric, Radovan Kovacevic -- Pre-Processing of Heterogeneous Objects for Layered Manufacturing / Ki-Hoon Shin, Debasish Dutta.
• Experimental Study of Forming Rene95 Alloy Parts by Laser Cladding / Qilin Deng, Dejin Hu, Jingyu Pei, Wenwu Zhang, Y. Lawrence Yao -- Laser-Assisted Machining of Reaction Sintered Mullite Ceramics / Patrick A. Rebro, Yung C. Shin, Frank P. Incropera -- Pressure Generated During Pulse Electrochemical Machining / J. Kozak, K. P. Rajurkar -- Development of the Cylindrical Wire Electrical Discharge Machining Process / Jun Qu, Albert J. Shih, Ron Scattergood -- Femtosecond Excimer (248 nm) Laser Micro-machining of Teflon (PTFE) / K. P. Adhi, R. L. Owings, T. A. Railkar, W. D. Brown, A. P. Malshe -- Residual Stress Reduction by Pulsed Magnetic Treatment / Barney E. Klamecki -- Microstructure Integrated Modeling of Multiscan Laser Forming / Jin Cheng, Y. Lawrence Yao -- The Diffraction Limitation on Drilling Nano-Meter Holes by Laser Irradiation / Y. F. Luo, W. Lineton -- Manufacturing Systems Management and Optimization -- Balancing of Competitiveness Metrics and Measures for Excellence in Manufacturing / Suren N. Dwivedi, Biren Prasad -- Special Paper from Med Technical Committee -- Introduction / K. Subramanian -- Manufacturing Engineering Education in the Context of Globalization / J. C. Swearengen, K. Subramanian -- Some Transport Issues in the Development, Qualification, and Manufacture of Electronic Packages / Bahgat Sammakia, Koneru Ramakrishna -- 2001 Manufacturing Odyssey: Impact of Globalization on Technology Requirements / Shounak Athavale, Matt Davies.
• Emerging Technologies and Research Issues in Nontraditional Manufacturing / Y. Lawrence Yao, Richard N. Smith -- Industry-University Educational Partnerships for the New Millennium: Experiences and Lessons Learned / Gloria J. Wiens, David C. Grider.

ISBN

• 0791835499
• 9780791835494

LCCN

2002265754

OCLC

• ocm48691077
• 48691077
• SCSB-9307779

Owning Institutions

Princeton University Library