Research Catalog

Title

Mechanical alloying : proceedings of the International Symposium on Mechanical Alloying held in Kyoto, Japan, May 7-10, 1991 / sponsored by the Japan Society for Powder and Powder Metallurgy ; guest editor-in-chief, P.H. Shingu ; guest editorial board, K.N. Ishihara [and others].

Author

International Symposium on Mechanical Alloying (1991 : Kyoto, Japan)

Publication

Zürich, Switzerland : Trans Tech Publications ; Brookfield, VT : Distributed in the Americas by Trans Tech Publications c/o Ashgate Pub. Co., ©1992.

Items in the Library & Off-site

Details

Additional Authors

• Shingu, P. H. (Paul Hideo), 1938-
• Funtai Funmatsu Yakin Kyōkai.

Description

816 pages : illustrations; 25 cm

Series Statement

Materials science forum, 0255-5476 ; v. 88-90

Uniform Title

Materials science forum ; v. 88-90.

Subject

• Heat resistant alloys > Congresses
• Powder metallurgy > Congresses
• Dispersion strengthening > Congresses
• Mechanical chemistry > Congresses
• Dispersion strengthening
• Heat resistant alloys
• Mechanical chemistry
• Powder metallurgy
• Kongress
• Mechanisches Legieren
• Métallurgie des poudres
• Alliages réfractaires

Genre/Form

• Conference papers and proceedings.
• Kioto (1991)

Bibliography (note)

• Includes bibliographical references and indexes.

Contents

• I. Basics -- Fundamentals of Mechanical Alloying / J.S. Benjamin -- I-1. Fundamentals -- Mechanical Alloying: Development of Microstructure and Alloying Mechanisms / J. Zbiral and G. Jangg -- Atomic Disorder and Phase Transitions in Intermetallic Compounds by High-Energy Ball Milling / H. Bakker and L.M. Di -- Amorphization in a Vibrating Frame Grinder: an Example of Phase Transition in Driven Systems / Y. Chen, R. Le Hazif and G. Martin -- Thermodynamics and Kinetics of Amorphisation during Mechanical Alloying / A.R. Yavari and P.J. Desre -- Crystal to Non-equilibrium Phase Transition Induced by Ball-Milling / E. Gaffet and L. Yousfi -- Morphological Evolution and Amorphization of Ti/Cu and Ti/Al Powder Mixtures during Vibratory Ball Milling / Y.H. Park, H. Hashimoto and R. Watanabe -- Deterministic Mechanical Alloying / A.D. Jatkar and J.S. Benjamin -- Novel Method for Mechanical Amorphisation of Bulk Samples / L. Daroczi and D.L. Beke -- Solid State Formation of Al-TM (TM; Ti, Zr, Nb and Ta) Amorphous Alloys by Mechanical Rod Milling / M.S. El-Eskandarany, K. Aoki and K. Suzuki -- Model Simulation of Vibratory Ball Milling of Metal powders / H. Hashimoto and R. Watanabe -- High Quality Powder Production of MA Amorphous TiAl System by Reaction Ball Milling / S. Kobayashi and H. Kimura -- A Specimen Preparation of Ti-Mo Alloy for Electron Microscopy Using Ni-Plating Method and Observation of Lattice Images / W.Y. Lim, E. Sukedai, M. Hida and K. Kaneko
• Heat Exchange Calculation of Thermally Regulated Attritor for Mechanical Alloying / E.T. Brook-Levinson, A.A. Kolesnikov and I.V. Fine -- The Role of Energy Transfer in Mechanical Alloying Powder Processing / M. Magini -- Fractal Kinetics of Mechanical Alloying / P.A. Vityaz, A.A. Kolesnikov, A.S. Balankin and V.S. Ivanova -- Wetting Effects in Solid State Amorphization by Ball Milling / A. Serebryakov -- F.C.C. Metastable Phase Induced in the Ti-Al System by Mechanical Alloying of Pure Elemental Powders / W. Guo, S. Martelli, F. Padella, M. Magini, N. Burgio, E. Paradiso and U. Franzoni -- Mechanical Alloying of Fe-Ni-Ti Austenite during Low Temperature Deformation / V.V. Sagaradze and S.V. Morozov -- Microstructure and Mechanical Properties of HIPed Compacts of Mechanically Alloyed Ti-Al Powder / Y.H. Park, H. Hashimoto, R. Watanabe, J.H. Ahn and H.S. Chung -- Method of Coating Application by Solid State Reactions / N.S. Enikolopian, N.G. Danielian and K.G. Kazarian -- I-2. Dispersion Strengthening -- Recent Developments and Challenges in the Application of Mechanically Alloyed, Oxide Dispersion Strengthened Alloys / J.J. de Barbadillo and G.D. Smith -- Preparation of Carbide-Dispersion-Strengthened Coppers by Mechanical Alloying / T. Takahashi and Y. Hashimoto -- Microstructure and Textures of ODS Ferritic Alloys Obtained by Mechanical Alloying / A. Alamo, H. Regle, G. Pons and J.L. Bechade -- Coarse Elongated Grain Growth in a Mechanically Alloyed Ni-Base Superalloy / Y.S. Song, W.C. Kim and T.H. Kim
• Copper-Tungsten in Situ Composite by Mechanical Alloying / T. Raghu, W. Krishmaswamy and R. Sundaresan -- Studies on Mechanically Alloyed 7010 Aluminium Alloy -- [actual symbol not reproducible] Composites / A. Bhaduri, A.N. Tiwari, V. Gopinathan and P. Ramakrishnan -- Mechanically Alloyed ODS Steel & Ni-Base Superalloys: -- A Study of Directional Recrystallisation Using DSC / K. Mino, H. Harada, H.K.D.H. Bhadeshia and M. Yamazaki -- Deformation Behavior and Properties of Mechanically Alloyed Aluminum Alloys / J.H. Weber and D.J. Chellman -- Application of MA-ODS Fe-Base Incoloy Alloy MA956 to Skid Rails for a Reheating Furnace / K. Tsukuta, T. Iikubo, S. Isobe and J.J. Fischer -- Volume Manufacturing and Applications of Mechanically Alloyed Materials / G.M. McColvin and M.J. Shaw -- II. New Structure -- The Synthesis of Non-Equilibrium Structures by Ball Milling / C.C. Koch -- II-1. Amorphous Structure Formation -- High Plastic Deformation and Amorphization of Crystal Systems / V.A. Pavlov, V.P. Ketova, T.S. Boyarshinova, V.I. Shalaev, M.V. Popov, V.S. Vakhrusheva and S.V. Atanasov -- Mechanical Alloying of Fe-C and Fe-C-Si systems / T. Tanaka, S. Nasu, K. Nakagawa, K.N. Ishihara and P.H. Shingu -- Preparation of Iron-Metalloid Amorphous Powders by Mechanical Alloying / S. Surinach, M.D. Baro, J. Segura, N. Clavaguera and M.T. Clavaguera-Mora -- Ball Milling of the Partial Amorphous [actual symbol not reproducible] Alloy / K.Y. Wang, J.T. Wang, M.X. Quan and W.D. Wei
• The Influence of Ball Milling on the Kinetics of Crystallization of the Amorphous Alloy [actual symbol not reproducible] / I.A. Tomilin, T.J. Mochalova and S.D. Kaloshkin -- Ball Milling of Co-Fe-Si-B Alloys / H. Matyja, D. Oleszak and J. Latuch -- Relaxation Behavior of Amorphous Alloys Produced by Mechanical Alloying / A. Inoue, K. Matsuki and T. Masumoto -- Preparation of Al-La-Ni Amorphous Alloys with Significant Supercooled Liquid Region by Mechanical Alloying / K. Matsuki, F. Abe, A. Inoue and T. Masumoto -- Calorimetry Study about Ni[subscript 50]Ti[subscript 50] Ball Milled Powders / D.Z. Sun, L.Z. Cheng, Y.M. Zhang and K.Y. He -- Chemical Short-Range Order Structure of Ni-Ti Neutron Zero Scattering Amorphous Powders Synthesized by MA / T. Fukunaga, M. Misawa, K. Suzuki and U. Mizutani -- Amorphization of Mixed Ni and Zr Powders by Mechanical Alloying / O. Haruyama and N. Asahi -- Crystal-to-Amorphous Transition of NiV and NiZr Intermetallic Compounds by Mechanical Milling / Y. Homma, T. Fukunaga, M. Misawa and K. Suzuki -- Microstructural Refinement and Amorphization in Ti-Al, Ti-Si and Si-W System by Mechanical Alloying / J.-H. Ahn, H.S. Chung, R. Watanabe and Y.H. Park -- The Process of Solid State Transformation of Ti-Al System during Mechanical Alloying / M. Qi, M. Zhu, G.B. Li, D.Z. Yang and K.H. Kuo -- Amorphization of Intermetallic Compounds Dispersed in the Aluminum Matrix by Mechanical Alloying / H. Sugiyama, J. Kaneko and M. Sugamata
• Formation Process of Amorphous Phase during Mechanical Alloying for Al-6 and 12at%Ti Mixed Powders / S. Saji, S. Abe and K. Matsumoto -- Metastable Phase Transition Induced by Ball-Milling in the Ge-Si System / E. Gaffet, F. Faudot and M. Harmelin -- Metastable Phase Transition Induced by Mechanical Alloying in a Si(B/C) Mixture / E. Gaffet, P. Marco, M. Fedoroff and J.C. Rouchaud -- Amorphous Phase Formation in the Fe-W System Induced by Mechanical Alloying / T.D. Shen, K.Y. Wang, M.X. Quan and J.T. Wang -- Structural Evidence for the Amorphization of Mechanically Alloyed Cu-Ta Powders Studied by Neutron Diffraction and EXAFS / C.H. Lee, M. Mori, T. Fukunaga, K. Sakurai and U. Mizutani -- Chemical Evidence for the Amorphization of Mechanically Alloyed Cu-Ta Powders Studied by XPS and Low-Temperature Specific Heat Measurements / U. Mizutani, C.H. Lee, T. Fukunaga, M. Takaki and K. Tanaka -- Mechanical Alloying of a Mixture of Y, Cu and Ba Elemental Powders in the Formation Process of the [actual symbol not reproducible] Superconducting Oxides / U. Mizutani, C. Imaeda, S. Murasaki and T. Fukunaga -- Preparation of Fe-C-B Powders by Mechanical Alloying and Heat-Resistant Hardness of Their Hot-Pressed Products / T. Ogasawara, A. Inoue and T. Masumoto -- Amorphization of Solids and High Pressure / E.G. Ponyatovsky and O.I. Barkalov -- Solid State Amorphization in the C15 Laves Phase TbFe[subscript 2] by Hydrogenation / K. Aoki, X.-G. Li and T. Masumoto -- II-2. Solid Solution Formation
• Light Metals Synthesis by Mechanical Alloying / C. Suryanarayana and F.H. Froes -- Formation of (Al, In)-Sb Alloys by Mechanical Alloying / K. Uenishi, K.F. Kobayashi, K.N. Ishihara and P.H. Shingu -- Non-Equilibrium Phase Formation in Fe-Ag-Cu System by Mechanical Alloying / K. Uenishi, K.F. Kobayashi, K.N. Ishihara and P.H. Shingu -- Calorimetric Characterization of the Polymorphous Phase Diagram for Mechanically-Alloyed Zr-Al / E. Ma and M. Atzmon -- Preparation of Cu[subscript x]Hg[subscript 1-x] Solid Solutions by Mechanical Alloying / E. Ivanov -- Formation of Al-Fe Supersaturated Solid Solution by Mechanical Alloying / V.I. Fadeeva and A.V. Leonov -- Sintering Behaviors of MG Powders of Copper Lead Alloys / Y. Tanaka, T. Ohasi and H. Ohara -- Kinetics of Ordering in Ni[subscript 3]Al Based Alloys Disordered by Ball Milling / J. Malagelada, S. Surinach, M.D. Baro, S. Gialanella and R.W. Caha -- II-3. Nano-Crystalline Materials -- Investigation of Nanometer-Sized FCC Metals Prepared by Ball Milling / J. Eckert, J.C. Holzer, C.E. Krill III and W.L. Johnson -- Stability of Nanocrystalline Structures in the Ti-Cu System / Y.R. Abe and W.L. Johnson -- Nano-Meter Ordered Grain Structure Formation by Mechanical Alloying / J. Kuyama, K.N. Ishihara and P.H. Shingu -- Mechanical Alloying of Aluminium and Iron Powders to Produce Nanocrystalline Al[subscript 3]Fe / M.A. Morris and D.G. Morris
• Nanocrystalline Iron-Titanium Alloys Prepared by High-Energy Mechanical Deformation / M.L. Trudeau, R. Schulz, L. Zaluski, S. Hosatte, D.H. Ryan, C.B. Doner, P. Tessier, J.O. Strom-Olsen and A. Van Neste -- Properties of Materials with a Fine Length Scale: Mechanically Alloyed Metals and the High Temperature Superconductor [actual symbol not reproducible] / J.R. Thompson -- Nano-Crystalline Consolidation of MA Powders by EDC / D.K. Kim and K. Okazaki -- A Mossbauer Spectrometry Study of the Magnetic Properties and Debye Temperature of Nanocrystalline Cr-Fe / H. Kuwano, H. Ouyang and B. Fultz -- Mossbauer Study of Mechanically Alloyed Powders / S. Nasu, S. Imaoka, S. Morimoto, H. Tanimoto, B. Huang, T. Tanaka, J. Kuyama, K.N. Ishihara and P.H. Shingu -- III. Physics and Chemistry -- Structure and Magnetic Properties of 3d-Metal-Based Compounds after Mechanical Treatment / A. Ye. Yermakov -- III-1. Intermetalic Compounds Formation -- Synthesis of Metastable Aluminum-Based Intermetallics by Mechanical Alloying / R.B. Schwarz, S. Srinivasan and P.B. Desch -- Metastable Phases in the Design of Structural Intermetallics / P. Nash, H. Kim, H. Choo, H. Ardy, S.J. Hwang and A.S. Nash -- The Production of Intermetallics Based on NiAl by Mechanically Alloying / S.J. Hwang, P. Nash, M. Dollar and S. Dymek -- Study of Intermetallides' Synthesis by Mechanical Alloying Technique / P.A. Vityaz, A.A. Kolesnikov, A.A. Stephanovich and V.F. Nozdrin
• Preparation of Ni-50at%Ti Amorphous Alloy and Ni[subscript 3]Al Intermetallic Compound by Mechanical Alloying / H. Esaki and M. Tokizane -- Consolidation of Mechanically Alloyed Al-Ni and Al-Ti Powders / T. Itsukaichi, S. Shiga, K. Masuyama, M. Umemoto and I. Okane -- High Hardness TiAl Alloys through Reaction Milling and Hot Compaction / T. Suzuki, T. Ino and M. Nagumo -- Mechanically Alloyed Al-Ti Alloy for Superplastic Forming Characteristics / P.W. Sonawane, W. Krishnaswamy, A. Dutta and R. Sundaresan -- The Effect of Ball Milling on Consolidation Properties of NbAl[subscript 3] / H. Yoshizawa and Y. Saito -- Structural Observation of Metastable Phases Prepared by MA in V-M(=Fe, Cu) Systems / T. Fukunaga, M. Mori, M. Misawa and U. Mizutani -- Effect of Ball-Milling on Compound Formation from Elemental Mixtures of Cr-Nb-Si Powders / M.A. Morris -- Milling Induced Phase Transitions and Quasicrystal Formation in Al-Cu-Based Alloys / J. Eckert -- Mechanically Alloyed Permanent Magnets / L. Schultz -- III-2. Mechanochemistry -- The Chemical Forces in Mechanical Alloying / P. Ju. Butyagin -- Structural Studies by X-Ray and Neutron Diffraction Techniques on Mechanically Alloyed Powders / G. Cocco -- Mechanochemistry of Interfaces / V. Boldyrev and E. Boldyreva -- Mechanochemical Reaction between Metals and Hydrocarbons -- Formation of Metal Hydrides / K. Tokumitsu -- Mechanochemical Alloying in Composite Solid Electrolytes / E.F. Hairetdinov and E.F. Uvarov
• Mechanochemical Reaction in Various Systems Involving Ionic and Hydrogen Bond Crystals / M. Hida, W.Y. Lim, A. Sakakibara, Y. Takemoto and S. Fujimoto -- Mechanochemical Technology of Synthesis of Refractory Compounds and Alloys Based upon Them / A.A. Popovich, V.P. Reva, V.N. Vasilenko and O.A. Belous -- Microscopic Phase Transformation -- Crystallization from Non-Crystalline Hydrogels through Mechanical Stressing / T. Isobe and M. Senna -- Formation and Properties of Amorphous Magnesium Silicates / Jiefan Liao and M. Senna -- Change of Substructure and Mechanical Properties of the Surface Layer of Metals and Polymineral Complexes at Mechanical Affect in Various Media / G.G. Kochegarov -- Mechanical Alloying of Transition Metal-Silicon Mixed Powder / N. Iwamoto and S. Uesaka -- Ball Milling of Cu-Ti-H: Amorphization Reactions and Hydride Stability / L. Battezzati, M. Baricco, S. Enzo, L. Schiffini, I. Soletta and G. Cocco -- The Direct Synthesis of Metals and Alloys by Mechanical Alloying / G.B. Schaffer and P.G. McCormick -- Synthesis of Nitrides by Mechanical Alloying / A. Calka and J.S. Williams -- Preparation of Ultrafine-Grained TiN and (Ti, Al)N Powders by Mechanical Alloying / Y. Ogino, M. Miki, T. Yamasaki and T. Inuma -- Reactive Ball Mill for Solid State Synthesis of Metal Nitrides Powders / M.S. El-Eskandarany, K. Sumiyama, K. Aoki and K. Suzuki -- Formation of Iron-Nitrides by Mechanical Alloying in NH[subscript 3] Atmosphere / T. Koyano, C.H. Lee, T. Fukunaga and U. Mizutani.

ISBN

• 0878496335
• 9780878496334

OCLC

• ocm26028012
• 26028012
• SCSB-9171309

Owning Institutions

Princeton University Library