Research Catalog

  • Improving the fatigue resistance of adhesive joints in laminated wood structures [microform] / Theodore L. Laufenberg ... [et al.].

    • Text
    • Washington, D.C. : U.S. Dept. of Energy, Conservation and Renewable Energy, Wind/Ocean Technology Division ; [Springfield, Va. : For sale by the National Technical Information Service, 1988]
    • 1988
  • Copolyimides prepared from ODPA, BTDA, and 3,4-ODA [microform] / inventors, Alice C. Chang, Terry L. St. Clair.

    • Text
    • [Washington, DC : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1994]
    • 1994
  • Vacuum hlding fixture and method for fabricating piezolectric poylmer acoustic sensors [microform] / inventor, E. Thomas Hall, Jr.

    • Text
    • [Washington, DC : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1994]
    • 1994
  • Permeability testing of composite material and adhesive bonds for the DC-XA composite feedline program [microform] / A.T. Nettles.

    • Text
    • [Marshall Space Flight Center, Ala. : National Aeronautics and Space Administration, George C. Marshall Space Flight Center ; [Springfield, Va. : National Technical Information Service, distributor, 1995]
    • 1995
  • Surface characterization in composite and titanium bonding [microform] : semi-annual report, April 1, 1986 to September 30, 1986 / by T.A. DeVilbiss and J.P. Wightman.

    • Text
    • Blacksburg, VA : Virginia Polytechnic Institute and State University ; [Washington, DC : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1986]
    • 1986
  • Mode I delamination growth in adhesively bonded joints under static and fatigue loads [microform] : semi-annual report / by Subodh C. Biswas, Shaik Jeelani.

    • Text
    • Tuskegee, AL : School of Engineering and Architecture, Tuskegee University ; [Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1986?]
    • 1986
  • Differences in interfacial bond strengths of graphite fiber-epoxy resin composites [microform] / Howard L. Needles.

    • Text
    • [Washington, DC : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1985]
    • 1985
  • Criterion for mixed mode fracture in composite bonded joints [microform] / S. Mall and N.K. Kochhar.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; [Springfield, Va. : For sale by the National Technical Information Service, 1986]
    • 1986
  • Mixed-mode cyclic debonding of adhesively bonded composite joints [microform] / by Mohammad Ali Rezaizadeh and Shankar Mall.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; [Springfield, Va. : National Technical Information Service, distributor, 1985]
    • 1985
  • Method for the production of strongly adhesive metal films on titanium and titanium alloys with a metallization process [microform] / H.-J. Hahn.

    • Text
    • Washington D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : National Technical Information Service, distributor, 1986]
    • 1986
  • Materials research for High Speed Civil Transport and generic hypersonics [microform] : adhesive durability / Mark R. Allen.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; [Springfield, Va. : National Technical Information Service, distributor, 1995]
    • 1995
  • Ultrasonic nondestructive characterization of adhesive bonds [microform] : annual performance report, period covered--12/23/96-12/22/97, grant number--NAG-1-1810 / [principal investigator], Jianmin Qu.

    • Text
    • [Washington, DC : National Aeronautics and Space Administration ; Springfield, Va. : National Technical Information Service, distributor, 1997]
    • 1997
  • Global-local finite element analysis for thermo-mechanical stresses in bonded joints [microform] : grant NAG1-1686 / principal investigator, Erdogan Madenci.

    • Text
    • [Hampton, Va.] : NASA Langley Research Center ; [Springfield, Va. : National Technical Information Service, distributor, 1997]
    • 1997
  • Surface analysis and tools [microform] / Kazuhisa Miyoshi.

    • Text
    • Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center ; Hanover MD : Available from NASA Center for AeroSpace Information, [2002]
    • 2002
    • 1 Resource

    Available Online

    http://purl.access.gpo.gov/GPO/LPS36332
  • RSRM nozzle fixed housing cooldown test final report [microform] / prepared by D. J. Bolieau.

    • Text
    • Brigham City, Utah : Morton Thiokol, Inc., Aerospace Group ; [Washington, D.C. : National Aeronautics and Space Administration, 1989]
    • 1989
    • 1 Resource

    Available Online

    http://purl.access.gpo.gov/GPO/LPS68324
  • Evaluation of a metering, mixing, and dispensing system for mixing polysulfide adhesive [microform] : final report / prepared by K.B. Evans.

    • Text
    • Brigham City, Utah : Morton Thiokol, Inc., Aerospace Group ; [Washington, D.C. : National Aeronautics and Space Administration, 1989]
    • 1989
    • 1 Resource

    Available Online

    http://purl.access.gpo.gov/GPO/LPS67542
  • Effects of tacky mat contamination on bond degradation for Chemlok/liner and NBR/liner bonds [microform] : final report / prepared by A.M. Padilla/Norma LaBau.

    • Text
    • Brigham City, Utah : Morton Thiokol, Inc., Aerospace Group ; [Washington, D.C. : National Aeronautics and Space Administration, 1989]
    • 1989
    • 1 Resource

    Available Online

    http://purl.access.gpo.gov/GPO/LPS67544
  • Adhesion and wear resistance of materials [microform] / Donald H. Buckley.

    • Text
    • [Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, 1986]
    • 1986
  • Failure mechanisms of laminates transversely loaded by bolt push-through [microform] / William Allen Waters, Jr. and Jerry G. Williams.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1985]
    • 1985
    • 1 Resource

    Available Online

    http://purl.access.gpo.gov/gPO/LPS85281
  • Effect of debond growth on stress-intensity factors in a cracked orthotropic sheet stiffened by a semi-infinite orthotropic sheet [microform] / C.A. Bigelow.

    • Text
    • Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1986.
    • 1986
  • Material characterization of structural adhesives in the lap shear mode [microform] / Steven C. Schenck and Erol Sancaktar.

    • Text
    • Potsdam, N.Y. : Clarkson College of Technology ; Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1983]
    • 1983
  • Evaluation of high temperature structural adhesives for extended service [microform] : phase IV / C.L. Hendricks, S.G. Hill, J. N. Hale.

    • Text
    • Seattle, Wash. : Boeing Aerospace Company ; Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1985]
    • 1985
  • Repeatability of mixed-mode adhesive debonding [microform] / R.A. Everett, Jr. and W.S. Johnson.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center : United States Army Aviation Systems Command, [1984]
    • 1984
  • Processing study of a polyimideslfone adhesive [microform] / Donald J. Progar.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1984]
    • 1984
  • Hot melt adhesive pad surface attachment assembly concept for on-orbit operations [microform] / Donald J. Progar and Bland A. Stein.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1984]
    • 1984
  • Characterization of a thermopastic polyimidesulfone [microfiorm] / James F. Dezern and Philip R. Young.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1985]
    • 1985
  • Characterization of mode I and mixed-mode failure of adhesive bonds between composite adherends [microform] / S. Mall and W. S. Johnson.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1985]
    • 1985
  • Influence of interface ply orientation on fatigue damage of adhesively bonded composite joints [microform] / W. S. Johnson and S. Mall.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1985]
    • 1985
  • Flexible backbone aromatic polyimide adhesives / Donald J. Porgar and Terry L. St. Clair.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1988]
    • 1988
    • 1 Resource

    Available Online

    https://purl.fdlp.gov/GPO/LPS105807
  • Flexible backbone aromatic polyimide adhesives [microform] / Donald J. Porgar and Terry L. St. Clair.

    • Text
    • Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1988]
    • 1988
    • 1 Resource

    Available Online

    http://purl.access.gpo.gov/GPO/LPS105807
  • Functionally graded adhesives for composite joints / Scott E. Stapleton and Anthony M. Waas, Steven M. Arnold.

    • Text
    • Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, [2011]
    • 2011
    • 1 Resource

    Available Online

    https://purl.fdlp.gov/GPO/gpo25000
  • Adaptive shape functions and internal mesh adaptation for modelling progressive failure in adhesively bonded joints / Scott E. Stapleton [and three others].

    • Text
    • Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, September 2014.
    • 2014-9
    • 1 Resource

    Available Online

    https://purl.fdlp.gov/GPO/gpo57381
  • The analysis of adhesively bonded advanced composite joints using joint finite elements / Scott E. Stapleton and Anthony M. Waas.

    • Text
    • Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, April 2012.
    • 2012-4
    • 1 Resource

    Available Online

    https://purl.fdlp.gov/GPO/gpo59436
  • Surface analysis and tools / Kazuhisa Miyoshi.

    • Text
    • Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, August 2002.
    • 2002-8
    • 1 Resource

    Available Online

    https://purl.fdlp.gov/GPO/LPS36332
  • Process sensitivity, performance, and direct verification testing of adhesive locking features / Johnny L. Golden [and four others].

    • Text
    • Hampton, Virginia : National Aeronautics and Space Administration, Langley Research Center, 2012.
    • 2012
    • 1 Resource

    Available Online

    https://purl.fdlp.gov/GPO/gpo37083
  • Progressive damage analysis of bonded composite joints / Frank A. Leone, Jr., Donato Girolamo, Carlos G. Dávila.

    • Text
    • Hampton, Virginia : National Aeronautics and Space Administration, Langley Research Center, 2012.
    • 2012
    • 1 Resource

    Available Online

    https://purl.fdlp.gov/GPO/gpo37682

No results found from Digital Research Books Beta

Digital books for research from multiple sources world wide- all free to read, download, and keep. No Library Card is Required. Read more about the project.

digital-research-book
Explore Digital Research Books Beta